HarMUL 油基主乳化劑 HarMUL Oil-based Primary Emulsifier

簡介Introduction

HarMUL采用創新的分子設計與合成工藝，是人工合成的具有多活性官能團的表面活性劑，具備優異的乳化性能，可形成穩定的油包水型乳狀液，單劑使用成本較傳統乳化劑更具優勢。

HarMUL, developed through cutting-edge molecular design and synthesis technologies, is a synthetically produced surfactant with multiple surface-active groups. It exhibits excellent emulsifying performance, capable of forming stable water-in-oil emulsions, and its unit cost is relatively lower compared to conventional emulsifiers.

性能及優點Performance and Advantages

l 推薦加量：3%~5%；

l 成本較低：較常規乳化劑價格低，配制成本相對較低；

l 抗溫性能較好：體系抗溫達150℃，粘切適中，破乳電壓600V以上，高溫高壓濾失量小于3.0mL；

l 抗污染性優異：體系抗污染性能良好，抗鉆屑、地層水、壓裂液等能力良好。

l Recommended dosage: 3% to 5%;

l Cost-effective: It has a lower price compared to conventional emulsifiers, resulting in relatively lower formulation costs;

l Good temperature resistance: The system can withstand temperatures up to 150℃, with moderate viscosity and plastic viscosity, a demulsification voltage exceeding 600V, and a high-temperature high-pressure fluid loss of less than 3mL;

l Excellent pollution resistance: The system demonstrates good resistance to contamination, including resistance to drill cuttings, formation water, fracturing fluids, etc.

技術參數Technical Parameters

項目Item

技術指標Technical Index

外觀Appearance

可流動液體flowable liquid

密度Density(20°C)/(g/cm3)

0.90-1.00

傾點Pour Point/(℃)

≤-10

pH

5.0-8.0

乳化率Emulsification Rate/（%）

熱滾前Before Hot Rolling

≥90.0

熱滾后After Hot Rolling

≥90.0

破乳電壓Emulsion Breaking Voltage/（50℃，V)

熱滾前Before Hot Rolling

≥500

熱滾后After Hot Rolling

≥500

 

包裝Packaging

采用鍍鋅桶或塑料桶包裝，包裝牢固、密封良好，可根據用戶需求提供200L、50L兩種分裝規格。

The product is packaged in galvanized or plastic drums that are securely sealed. It is available in 200L and 50L sizes, packaged according to customer requirements.


HarMUL 油基主乳化劑 HarMUL Oil-based Primary Emulsifier